The BEPC Programmable Linear Measurement Solution allows for the selection of the encoder type (absolute or programmable incremental), output type or protocol, measuring wheel type and size, optional mounting bracket, and optional programming kit (for the programmable incremental encoder). This wide array of component choices permit a flexible, robust measurement solution that can be fine tuned to meet the exact requirements of your application.
PLMS with polyurethane wheel
Stock #176742-02
This spring loaded mounting bracket fits 2.5” (63.5mm) shafted encoders with servo mounts, and 58 mm shafted encoders with clamping flanges. It allows convenient application of an encoder and measuring wheel solution directly to a surface being measured. The bracket features a torsion spring, adjustable to up to 10 lbs of force, which permits the encoder and measuring wheel to be mounted in almost any orientation, even upside down. The single pivot action allows the assembly to adjust travel and wheel pressure for variations in material height. All units in inches and mm unless otherwise noted.
Spring loaded mounting bracket
For programmable incremental or absolute feedback, choose one of these encoders. Other encoder options are available. Contact for more information.
| Image | Model | Choose options: | Drawings | Datasheet | Product page |
|---|---|---|---|---|---|
 |
MODEL A58SEEthernet absolute encoder |
3/8" shaft MH Clamping flange Choose EtherCAT, EtherNet/IP, or PROFINET |
Drawing | Model A58SE (MH) | Datasheet | Model A58SE | Model A58SE product page |
 |
MODEL A58SBBus absolute encoder |
3/8" shaft MH Clamping flange Choose CANopen or SSI |
Datasheet | Model A58SB (MH) | Model A58SB product page | |
 |
MODEL A25SBBus absolute encoder |
3/8" shaft MC Servo mount Choose CANopen or SSI |
Drawing | Model A25SB (MC) | Datasheet | Model A25SB | Model A25SB product page |
 |
MODEL 25SPProgrammable incremental encoder |
3/8" shaft 2.5" (63.5mm) MC Servo mount* Select output type, waveform, and PPR |
Drawing | Model 25SP (MC) | Datasheet | Model 25SP | Model 25SP product page |
*The MG flange is also an option, but it will limit the orientation of the encoder to 120° increments
51品茶 offers to measure wheels in four different contact surfaces, all made of high-grade aluminum alloy. For more information on choosing the right measuring wheel for your application, refer to our Measuring Wheels Datasheet and also our Technical Bulletin TB-108 51品茶s with Measuring Wheels. Please specify 3/8" as the bore size to match encoder above.
Rubber Insert
Rubber insert wheels have less surface area in contact with the material, so more pressure is applied, resulting in less slippage. Rubber insert wheels are good for materials such as (but not limited to): paper, film, foil, hard plastic, and other smooth materials.
Polyurethane
This smooth, versatile material comes in different durometer ratings (that is, degrees of hardness). Polyurethane is good for materials such as (but not limited to): metal pipe, sandpaper, matting, cardboard/packaging, belting, insulated wire, metal, etc.
Knurled Aluminum
Knurled aluminum offers good traction, but should not be used with delicate materials. It is a good choice for materials such as (but not limited to): metal pipe, sandpaper, matting, cardboard/packaging, belting, insulated wire, metal, coarse fabric, cloth tape, rubber, rough wood, carpet, foam, insulation, or other rugged materials that won’t damage easily from constant contact with the wheel.
Hard Anodized Knurled Aluminum
Anodizing hardens the aluminum and prevents corrosion, so these wheels are good for harsh environments where there may be a washdown or exposure to corrosive elements. These wheels are also not meant for delicate materials, and are excellent for materials such as (but not limited to): coarse fabric, wood (i.e., lumber cut-to-length), or other durable materials.
This bracket simplifies installation of your linear measurement solution. Designed specifically for BEPC products, this bracket allows you to mount and install your encoder, bracket, and measuring wheel quickly and easily, without having to design, machine, or source a mounting solution .
The USB Programming Kit is required for field programming capability for the Model 25SP, and is available with any connector. See below for the User Guide, Quick Start Instructions, the video to see how simple it is to program your Model 25SP.
